Crafted from durable aluminum, the deLUX impresses with its practical flip-top system and timeless design.
from €94.76
Sold out
Highlight your aquarium with the deLUX - Flap aquarium cover
Our deLUX - Flap cover, equipped with a convenient flip-top system, represents outstanding quality and functionality. The elegant, minimalist, and sleek design of the deLUX is perfect for aquariums between 30 and 250 cm in length. Made from high-quality aluminum, it combines aesthetics with sturdiness and longevity. Ideally matched to the eco+, PRO², spotBEAM, and aquaLUMix LED lighting, this cover guarantees unparalleled value.
Selection: Over 2000 combinations are available! Whether square or rectangular - with or without a cutout for equipment: This cover adapts to your aquarium and your needs.
Individual selection options:
Cutout for equipment:
- Standard = Cutout on the long side (long side is against the wall)
- Room divider = Cutout on the short side (short side is against the wall)
- Freestanding or internal equipment shaft = without cutout
Flexibility:
The deLUX - Flap aquarium cover has, depending on the selection, 1 to 3 support profiles for accommodating our LED systems eco+, PRO², spotBEAM, and aquaLUMix. This ensures ideal light distribution depending on the depth and area of the tank. The eco+ and PRO² LED bars are attached with the included mounting brackets, while the aquaLUMix and spotBEAM are slid directly into the support profile and secured. The temperature-optimized support profile absorbs heat perfectly.
The frame of our aquarium covers has a circumferential bar for mounting by hanging or setting up lighting with the corresponding mounting option. The separately available TRIO holder for U-profile is the ideal accessory and the perfect complement. As are the standard bracket mounts for the aquaLUMix and PRO² LED bars. This allows the lighting to be freely positioned in the frame and moved as required.
In addition, our frame profile also offers a circumferential groove as an alternative fixing point for our eco+ and PRO² LED systems. This allows mounting directly in the frame at 90° to the water surface, with free choice of position. Perfectly suited for the very special effects of light simulation, e.g. for a horizontally illuminated moonlight or sunset over the water surface.
Functional features:
The integrated XL dirt and water level baffle (-38mm from the glass top edge) ensures a clean and undisturbed view all around.
The well-thought-out design also allows easy access to the aquarium. The lid flaps can be set up individually or even completely removed with just one hand. The highlight is the insides of the lid panels, which have a mirror-like highly reflective surface that minimizes scattering losses and makes the maximum LED light usable.
Lid division:
- The lid division determines the number of support profiles and depends on the measurement of the short side. The position and distances are always evenly distributed, an exception is possible through the service: Individual lid division.
Perfection: Thanks to precise manufacturing, all components are characterized by minimal gaps and impressive stability. Our frame profiles are corrosion-protected, fully anodized (titanium gray) or powder-coated (white) and impress with matte, brushed surfaces. Other components, such as the internal corner connectors made of aluminum, V4A stainless steel screws, and a lid made of aluminum composite panels, guarantee longevity. Integrated silicone handles in the lid complete the appealing design.
Important to know:
- The glass thickness of the aquarium is not relevant; the cover fits any glass thickness.
- The specified dimensions for length and width always refer from the outer edge to the outer edge of the aquarium and do not allow any margin to exceed them. 1mm air is taken into account on each side.
- The support profile (middle bar) always runs parallel to the selected length of the cover.
- We always centrally plan and deliver the support profile in relation to the width, or in the case of several support profiles, it's evenly distributed across the width. This then determines the lid sizes accordingly.
- The maximum length of an LED light is: edge length of aquarium minus 9 cm (when mounted in the support profile), or minus 5 cm (when mounted/hanging in the frame profile)
- The fold-up lid is made in two parts from a length of 130cm and in three parts from a length of 250cm.
- Size and position of the cutouts for equipment: up to 40cm 1x 10cm in the center. From 50cm length with 5cm distance from the corner 2x 10cm, from 120cm 2x 15cm, from 150cm 3x 15cm (of which 1x in the center)
- The deLUX aquarium cover is made to order according to customer requirements, which is why this item is expressly excluded from the right of withdrawal. If you are unsure about the selection, we recommend our sample case!
Scope of delivery:
- 4 pieces frame profiles in length and color according to choice
- Support profiles and lid flaps in length, color, and number according to choice
- Silicone handles
- 8 pieces corner connectors with screws
- From 200cm edge length an adjustable support made of nylon
- 2 pieces mounting brackets up to 120cm in length, 4 pieces from 130cm in length
- When combined with the aquaLUMix delivery without mounting brackets!
- Without lighting
No retaining bridges are necessary for the aquaLUMix!
The maximum length of an LED light is
Aquarium edge length minus 9cm, when mounted in the light profile
Aquarium edge length minus 5cm, when mounting/hanging in frame profile
Example configuration of a 130cm light profile
4x 116cm LED lighting bars, (2 No. retaining clip bridges required).
2x 116cm, 4x 50cm LED lighting bars, (4 No. retaining clip bridges required).
1x 116cm, 1x 80cm, 2x 50cm, 3x 30cm, 1x 20cm LED lighting bars, (6 No. retaining clip bridges required).
Videos
Glossary Here we present our glossary, which contains carefully compiled definitions and explanations of key terms relating to our aquarium covers. This glossary serves as a handy resource to help you gain a deeper understanding of the specific features, options and configurations of our products. Whether you are an experienced aquarist or just starting out on your aquarium adventure, this collection of term explanations will help you make the best possible decisions for your aquarium and its equipment. Dive into the world of aquarium coverings with our comprehensive glossary designed to clarify your questions and expand your knowledge.
Glossary
Aluminium composite panel
This material (also known as sandwich panel) is used for the cover panels of our covers and consists of a robust plastic core coated on both sides with 0.3 mm thick aluminium. They are waterproof and therefore ideal for use above water. The upper side is kept in a maximum similar colour to the frame, while the underside is highly reflective and mirror-like, which optimises the light yield in the aquarium. The overall thickness is around 3 mm. The panels are covered with a protective film on both sides to protect them during transport.
Wide side
In relation to aquarium covers, the wide side refers to the shorter side of the aquarium or glass tank. It is the side that is usually referred to as the side pane. This measurement is crucial when choosing the right size for aquarium covers to ensure an exact fit and optimum functionality.
deLUX
The deLUX series stands for high-quality aquarium covers made of first-class aluminium. This series is characterised by precise manufacturing processes that guarantee minimal gaps and impressive stability. The covers are available in the colours titanium grey and white. The frame profiles in titanium grey are fully anodised, which makes them corrosion-resistant, while the white frames are powder-coated, both with a matt, brushed finish. A characteristic feature of the deLUX series is that it is only available in common standard sizes, unlike the Vario series, which offers customised solutions with a high-quality plastic frame. A gravel screen that matches the deLUX series is not available.
Cover layout
The cover layout defines the number and arrangement of the central profiles in an aquarium cover, which depends largely on the width of the cover. The layout is designed to optimise the functionality and manageability of the cover flaps. For example, two central profiles are possible from a width of 50 cm and three central profiles only from a width of 80 cm in order to ensure practical handling and sufficient opening sizes. To prevent the lid flaps from becoming too large and heavy, one central profile is provided up to a width of 70 cm and two central profiles up to a maximum width of 110 cm.
The resulting systems can be designed as a two-part hinged lid system (one support profile with two lid flaps), a three-part hinged lid system (two central profiles with one centre section and two lid flaps) or a four-part hinged lid system (three support profiles with two centre sections and two lid flaps). The positioning and spacing of the support profiles are evenly distributed across the width of the aquarium, although individual adjustments can be made using the 'Customised cover layout' service. All support profiles are aligned parallel to the long side of the aquarium cover.
Flap
In our aquarium covers, "flap" refers to a hinged lid system that allows easy access to the aquarium. The design with hinged lids allows the lid flaps to either be raised or removed completely if required. Depending on the model and size of the cover, the lid flaps are supported by one to three support profiles to ensure optimum stability. To simplify handling and increase stability, the cover flaps are manufactured in two sections for lengths over 126 cm, three sections for lengths over 246 cm and four sections for lengths over 366 cm.
Retaining bridges
Retaining bridges are special fastening elements for the integration of LED bars (eco+ and PRO) into the support profile of the Flap aquarium covers. These retaining bridges enable safe and flexible flexible installation of the LED lighting. The standard scope of delivery includes two bridges are included for covers up to 125 cm in length, while four retaining bridges are included for covers longer than 126 cm. are included. Additional retaining bridges can be ordered separately if required. The LED bars are attached directly to the retaining bridges using self-tapping screws. directly to the retaining bridges using self-tapping screws, with the central groove on the The central groove on the back of the LED bar serves as a fixing point. This design This design ensures maximum flexibility both in the positioning of the bridges on the LED bar as well as the choice of mounting location in the support profile. support profile. A maximum of four eco+ LED bars or two PRO² and one eco+ LED bar can be mounted in parallel. For the aquaLUMix LED bars do not require retaining bridges.
Gravel panel
A gravel panel is a decorative element that serves to conceal the bottom edge of the aquarium and everything underneath it. It is ideal for concealing the sand, gravel or any debris so that the aquarium always looks neat and aesthetically pleasing. Our gravel screens are available in different heights (5 cm or 7 cm) and can be ordered for one to four sides of the aquarium as required. With a material thickness of 2 mm, they are robust and durable. The texture and colour of the gravel covers are matched to the Vario series of our aquarium covers; we cannot offer exactly matching gravel covers for the deLUX series. Installation is simple and straightforward thanks to the self-adhesive backing. The gravel cover can also be used as a dirt or water level cover in the upper section of the aquarium if it does not have a cover.
Long side
For aquarium covers, the long side refers to the longer side of the aquarium or glass tank, i.e. the front and back of the tank. This measurement is essential for determining the right size of cover to ensure perfect coverage and functionality.
Groove
The frame of our aquarium covers has a circumferential groove as an alternative fixing point for our eco+ and PRO² LED systems. This makes it possible to mount them directly in the frame at 90° to the water surface, with free choice of position. Perfectly suited for the very special effects of light simulation, e.g. for a horizontally illuminated moonlight or sunset over the water surface.
Self-glazing
The "for self-glazing" option for a Slide aquarium cover means that the cover is supplied without the usual cover elements. This option allows the customer to use their own customised cover elements, such as glass panels. Although the cover comes without cover elements, the required E-profiles, which are necessary for the functionality of the sliding cover system, are included in the scope of delivery. This offers a flexible solution for aquarists who want to design a customised cover with their own materials.
Slide
Slide is the name of our aquarium covers with sliding lid system with their purist and sleek design and easy sliding technology. The Slide system, in which cover elements are slid to the side, is suitable for aquarium sizes from 60x30 to 400x70 cm. The two- or four-part sliding cover with handle holes guarantees easy handling and maximum accessibility. A sealing lip for the top panel ensures that dripping condensation is removed from the bottom panel. And the special feature: The insides of the cover plates reflect the light so that no light is lost.
Dirt and water level screen
The attached frame of our aquarium covers covers the upper 38 mm of the aquarium and thus forms an integrated XL dirt and water level screen that ensures a clean and undisturbed field of vision all round.
Bar
In addition, our frame profile also offers a circumferential bar for fastening by hanging or setting up lighting with corresponding fastening options. The separately available TRIO holder for U-profile is the ideal accessory and the perfect complement. As are the standard bracket mounts for the aquaLUMix and PRO² LED bars. This allows the lighting to be freely positioned in the frame and moved as required.
Technical cut-outs
Technical cut-outs are specially designed cut-outs in the aquarium cover that can be fitted either on a wide side or long side. These cut-outs are intended for the installation and passage of aquarium technology such as filter supply lines, heaters, cables or similar. There is also the option of choosing an aquarium cover without technology cut-outs if no external devices are to be installed. The width and position of the technology cut-outs vary depending on the model and size of the aquarium cover selected, whereby the height of the cut-out is always 36 mm from the top edge of the glass. Detailed information on the available configurations of the technical cut-outs can be found in the product description of the respective model.
Central profile
The Flap aquarium cover has 1 to 3 central profiles to accommodate our eco+, PRO², spotBEAM and aquaLUMix LED systems, depending on the cover layout. This means that ideal light distribution is always possible, depending on the depth and surface area of the tank. The eco+ and PRO² LED bars are inserted and fastened directly into the central profile using the enclosed retaining brackets, while the aquaLUMix and spotBEAM are inserted and fastened directly into the central profile. In addition, the cover flaps are inserted into the support profile or set up vertically when opened. The central profiles are inserted into the frame of the cover without any further fixing and can therefore be easily moved and removed as required.
Vario
The Vario series of our aquarium covers is characterised by its high-quality, high-gloss plastic frames, which are available in black, white and mottled grey. This series offers the possibility of millimetre-precise production to the customer's individual desired dimensions, with a maximum length of up to 400 cm. For a harmonious and uniform look, matching gravel covers in the corresponding colours can be added as an option. The Vario series is therefore ideal for aquarists who value an individual, customised design for their aquarium.
Customisation is easy with us: in our shop you will find a variety of sizes in 5-10cm increments. If your aquarium is a special size, simply select the next larger standard length and specify your exact measurements when finalising your order. Our experts will take all the necessary details into account to ensure a perfect fit.
| deLUX made of Aluminum | Vario made of Plastic |
| Frame profiles made of anodized aluminum or matte brushed powder-coated. | Frame profiles in high-gloss plastic. |
| Available only in standard sizes as selectable in the shop. | In addition to standard sizes, millimeter-precise cuts to custom dimensions are possible. |
| Available colors Titanium Gray or White. | Available colors White, Gray mottled, or Black |
| Maximum length up to 200cm | Maximum length up to 400cm |
| Fixed technical cutouts, see product description | Flexible technical cutouts in position and size |
| Matching gravel strip available |
Note that with deLUX, custom sizes are not possible and only standard sizes are offered, while Vario allows for millimeter-precise adjustments and can be complemented with a matching gravel blend on request for a stylish look.
We offer Vario aquarium covers and gravel strips in a variety of directly selectable sizes in 5-10cm increments, which already cover 90% of the common aquarium sizes. However, if your aquarium has a special dimension, that's no problem. Simply choose the next larger standard length and specify your exact measurement when completing your order. For example, for a 97.5cm aquarium, select 100cm and then specify the exact 975mm in the last step at the checkout. Our experts will take care of details like the safety margin and ensure that your cover or gravel strip fits perfectly!
| Flap with folding lid | Slide with sliding lid |
|---|---|
|
With hinged cover system optionally with 1-3 center profiles |
With puristic sliding lid consisting of 2 elements Delivery optionally without cover plates for customer glazing. (for e.g. suspended lamps) |
| The lighting can be placed in the frame or freely attached to the carrier profiles. | The lighting is placed in the frame, e.g. with the TRIO bracket for eco+and PRO². |
| The maximum length of the lighting is tank length -9cm | The maximum length of the lighting is tank length -5cm |
| The minimum length of the lighting, none. | The minimum length of the lighting when using the TRIO bracket is tank length -30cm. |
With the Flap cover and its folding lid, the center profile (which also supports the cover flaps) is particularly suitable for accommodating the lighting. Depending on the lighting, it can be screwed to the profile or pushed in:
It is also possible to hang the lighting inside the frame. Due to the absence of a center profile, this is the ideal fastening for the Slide covers with sliding lid.
Here mounting with aquaLUMix, TRIO holder and U-profile + TRIO
Another option is to mount the LED bars laterally in the frame of the covers. This is particularly interesting, for example, to allow a moonlight to shine over the water.
With the Flap cover and folding lid, the center profile (which also supports the cover flaps) is particularly suitable for accommodating the lighting. Depending on the lighting, it can be screwed to the profile or pushed in:
The frame of our aquarium covers has a circumferential bar for mounting by hanging or setting up lighting with the corresponding mounting option. The separately available TRIO holder for U-profile is the ideal accessory and the perfect complement. As are the standard bracket mounts for the aquaLUMix and PRO² LED bars. This allows the lighting to be freely positioned in the frame and moved as required.
In addition, our frame profile also offers a circumferential groove as an alternative fixing point for our eco+ and PRO² LED systems. This allows mounting directly in the frame at 90° to the water surface, with free choice of position. Perfectly suited for the very special effects of light simulation, e.g. for a horizontally illuminated moonlight or sunset over the water surface.
Login
1 - 10 of 21 reviews
10 September 2024 07:33
Optimal
Die komplette Aquariumabdeckung passt sehr gut und ist leicht zu Handhaben.
4 August 2024 16:37
Super Abdeckung, Top Qualität, Mega Support!
Da kann man das Team von LEDaquaristik einfach nur loben.
Top Verarbeitung und viele Sachen zum späteren nachrüsten direkt mitgeliefert (man merkt, hier wird mitgedacht und nicht geknausert).
Habe vergessen die Individuelle Deckelaufteilung dazu zu kaufen, ist vom Support aber super gut und schnell gelöst worden. Super netter und zuvorkommender Support vom Team an diesem Punkt!
Die Ware kommt sehr gut verpackt beim Kunden an.
11 December 2023 07:29
Tolle Qualität! Eine echte Aufwertung!
Nach Totalausfall meiner alten Beleuchtung habe ich hier die Abedckung inkl. Beleuchtung und Tageslichtsteuerung gekauft. Damit die Pflanzen nicht zu lange im Dunkeln sind hatte ich um schnelle Bearbeitung gebeten. Es hat alles BESTENS funktioniert. Die Lieferung ist super schnell erfolgt, die Abdeckung ist absolut qualitativ hochwertig. Der Aufbau brauchte ein wenig Zeit, aber das Ergebnis ist super! Eine echte Aufwertung für das Aquarium. Und endlich eine Beleuchtung wie sie sein sollte. Vielen Dank an das tolle Team von LED Aquaristik! Unbedingt zu empfehlen!!
10 December 2023 11:00
MEGA, es passt einfach alles
Da es schon meine zweite Abdeckung ist bin ich immer noch total begeistert von der Qualität und dem Preis Leistungsverhältnis.
Kundenservice wird sehr groß geschrieben und genau so gelebt. Hier ist der Kunde noch König.
Da mir bei der Montage von meiner Sonderanfertigung ein Missgeschick passierte wurde ganz schnell reagiert und ein neues Ersatzteil ohne Probleme zugesandt.
Macht weiter so und ich bestelle gerne wieder bei euch und werde euch auf jeden Fall weiterempfehlen.
LG Torte
17 February 2022 08:42
Sehr gut
Nur beste Erfahrungen,gerne wieder.
15 September 2021 13:52
Sehr hohe Qualität. Sehr hochwertige Verarbeitung.
Sehr einfach zu montieren, sehr gute Tutorials verfügbar. Einziger Nachteil: bei starren Aussenfilterschläuchen (zb. Eheim) muss man die gesamte Abdeckung vom Aquarium entfernen, bevor man die Schläuche für eine Reinigung aus dem Becken heben kann. Hierzu sollte man sich nochmal Gedanken machen.
22 July 2021 17:50
Genau das was ich gesucht habe :)
Onlinebestellung: Die Auswahl war sehr einfach und schnell. Versand & Verpackung: Extrem schnell, bestellt und drei Tage später an mich versandt. Alles wurde sauber und vor Transportbeschädigungen geschützt verpackt. Montage: War sehr einfach und absolut ohne Anleitung möglich. ACHTUNG!!! Die Winkel für die Technikaussparungen sind etwas kürzer. Wertigkeit & Optik: Es fühlt sich alles sehr hochwertig an und ich kann absolut keine Makel erkennen. Alles wurde sauber verarbeitet, entgratet und macht insgesamt einen sehr hochwertigen Eindruck. Preis: Für so eine hochwertige Aquariumabdeckung absolut top. Hier wird an der Qualität nicht gespart, wenn es sich letztlich auch "nur" um Aluminiumprofile handelt, so ist hier auch wirklich viel Aluminium verarbeitet und das kostet eben :) Fazit: Für diesen Preis würde ich es direkt wieder kaufen!
6 May 2021 18:31
Genau was ich gesucht habe
Einfach zusammenstecken, festschrauben und aufs Becken aufsetzen, fertig, passt prima und sieht toll aus. Für die Eingriffe im Deckel werden Silikonstopfen mitgeliefert, die ich aber nicht eingesetzt habe. 1. die Futteröffnung ist immer sofort zu bedienen. 2. sich anstauendes CO2 unter der Abdeckung kann entweichen, so dass z.B. Kampffische, oder wie in meinem Fall Panzerwelse, die von Zeit zu Zeit an die Oberfläche gehen um Luft zu holen, nicht ersticken. 3. im Moment wächst die Blüte der Echinodorus durch dies Öffnung oben raus. Fazit: würde ich wieder kaufen.
26 April 2021 16:51
deLux Aquariumabdeckung
Obwohl als B-Ware bestellt konnte ich keine Mängel festsellen. Gehäuse macht einen sehr edlen Eindruck. Perfetker Service vom Team bei der Beratung und Durchführung, sprich Futterklappe nach Maß anfertigen. Auch hat das Team immer ein offenes Ohr, egal mit welchen Anliegen man kommt, das ist nicht unbedingt bei allen so. Bleibt Gesund und Fit, so das Ihr noch viele Kunden erfreut. Beste Grüße Uwe Zymowski
14 April 2021 13:09
Sehr schick mit kleinen Schwächen
Vorab, ich bin von den Produkten von ledaquaristik wirklich begeistert, daher habe ich mir auch diese Abdeckung in den Maßen 130x50cm zugelegt. Die Abdeckung war sehr gut verpackt, gut zusammen zu bauen und sieht alles in allem auch wirklich schick aus. Die Montage der Aqualumix war kein Problem und soweit ist alles tip top. 2 Punkte stören mich allerdings schon, daher habe ich auch 2 Punkte abgezogen. Erstens: Die Abdeckung könnte ein etwas weiter runtergezogen sein, also mehr das Becken überlappen. Bei mir braucht nur etwas Wasser zu verdunsten und schon habe ich eine Wasserkante. Das sieht nicht so schön aus und man schaut schnell gegen das Licht in der Abdeckung. Hier sollte meiner Meinung nach wirklich nachgebessert und die Abdeckung ca. 1 cm weiter nach unten gezogen werden. Zweitens: Den Mittelsteg der Abdeckung, an dem die Klappen und innen der Lichtbalken befestigt sind, verschiebe ich beim Wasserwechsel etc. gerne nach hinten. Wenn ich dabei nicht sehr vorsichtig bin, verkeilt sich der Balken im Rahmen der Abdeckung und ist nur mit großem Kraftaufwand wieder zu lösen. Insgesamt ist das Verschieben des Balken auch recht schwergängig. Hier wäre es vielleicht gut das Spaltmaß etwas zu erhöhen oder dafür zu sorgen, dass nicht Alu auf Alu reibt, vielleicht mit kleinen Plastikkappen am Balken. Sollten diese beiden Punkte behoben werden, würde ich der Abdeckung auf jeden Fall 5 von 5 Sternen geben. Weil schick ist das Teil auf jeden Fall.
