spotBEAM

Q: What is the durability of LED bars, and what contributes to optimal lifespan?

The lifespan of LED bars is about 40,000 operating hours under optimal conditions and proper care. This includes measures such as: regular external cleaning, using the CleanCover, avoiding heat build-up, avoiding persistent excessive wetness (not humidity), etc. Water cooling with the PRO and aquaLUMix products can be helpful but is not mandatory if there is sufficient ventilation.

Compact, powerful and flexible: measuring just 10 × 12 cm, spotBEAM LED spotlights let you create focused lighting effects or illuminate your entire aquarium. Choose FRESHWATER for freshwater or SEAWATER for marine aquariums and combine the lights with suitable mounts. Three separately dimmable light channels allow you to create individual lighting effects and natural daily lighting cycles with a compatible lighting controller.
Learn more ▼

spotBEAM

% Set

spotBEAM LED Lighting for Open Aquariums | Complete Set

2 Configure your set individually

The matching set is already preconfigured for your aquarium.

Review the selection and adjust the included components individually if required.

Review & adjust configuration

€178.56 €187.96 (5% saved)

Ready for dispatch in 1-3 buisness days

Details

spotBEAM LED light FRESHWATER

Illuminate, invigorate, enchant: PLANT-MIX, a light spectrum for optimal plant growth and gentle, tropical glow. Simply magical!

€99.99

Ready for dispatch in 1-2 buisness days

spotBEAM LED light FRESHWATER

Illuminate, invigorate, enchant: PLANT-MIX, a light spectrum for optimal plant growth and gentle, tropical glow. Simply magical!

€99.99

Ready for dispatch in 1-2 buisness days

No longer available

spotBEAM LED light AFRICAN-SUN

Transform your biotope into a colorful wonderland and offer your inhabitants lighting that's closest to their natural environment.

€99.99

Out of stock

Details

No longer available

spotBEAM LED light AFRICAN-SUN

Transform your biotope into a colorful wonderland and offer your inhabitants lighting that's closest to their natural environment.

€99.99

Out of stock

Details

spotBEAM LED light SEAWATER

With SEAWATER, your mini-reef becomes the stage! The specially tuned light emphasizes the natural colors and lets the underwater world shine in all its glory.

€99.99

Ready for dispatch in 1-2 buisness days

spotBEAM LED light SEAWATER

With SEAWATER, your mini-reef becomes the stage! The specially tuned light emphasizes the natural colors and lets the underwater world shine in all its glory.

€99.99

Ready for dispatch in 1-2 buisness days

spotBEAM mounting with gooseneck

For mounting on the edge or a strut of the aquarium / terrarium.

€25.99

Ready for dispatch in 1-2 buisness days

spotBEAM mounting with gooseneck

For mounting on the edge or a strut of the aquarium / terrarium.

€25.99

Ready for dispatch in 1-2 buisness days

spotBEAM lens for replacement

Available with 40°, 60° or 120° beam angle.

€12.99

Ready for dispatch in 1-2 buisness days

LEDaquaristik Gift Voucher – Give the Gift of Perfect Lighting!

Want to surprise someone but not sure which light color, length or accessories are the right choice? Our gift voucher is the perfect solution! Key Benefits: Choose any value between €25 and €200 Delivered conveniently via email – right after purchase Valid for all products in our online shop Easy redemption during checkout Ideal for birthdays, holidays, thank-you gifts & surprises How it works:You will receive your personal voucher code by email. Simply enter the code at checkout to redeem it. Any remaining balance can be used on future orders. Give joy and inspiration – with lighting that truly impresses.

Gutscheinwert

From €25.00

Ready for dispatch in 1-2 buisness days

FAQ - Frequently Asked Questions

Are the LEDs dimmable? Can they provide daylight simulation?

Yes, all our LED bars (eco+, PRO², and aquaLUMix) as well as the spotBEAM and powerBEAM pendant lights are dimmable.

Can I simulate daylight with your LED products?

Absolutely! We offer devices for automatic light control and daylight simulation. Our eco+ and PRO² LED bars have several color combinations , which are ideal for daylight simulation. You can also add effectcolors such as RED (dawn) and ROYAL BLUE (moonlight). The aquaLUMix already have a suitable light combination, and the same applies to powerBEAM & spotBEAM. Further details can be found in the product description.

What is the durability of LED bars, and what contributes to optimal lifespan?

The lifespan of LED bars is about 40,000 operating hours under optimal conditions and proper care. This includes measures such as: regular external cleaning, using the CleanCover, avoiding heat build-up, avoiding persistent excessive wetness (not humidity), etc. Water cooling with the PRO and aquaLUMix products can be helpful but is not mandatory if there is sufficient ventilation.

Are the LEDs also suitable for seawater?

Yes, of course, but the following must be taken into account.
Compared to fresh water, seawater is an extremely aggressive medium and only very few materials can withstand direct and permanent contact. In order not to unnecessarily shorten the service life of the LED bars, appropriate precautions should be taken when using them in seawater. In addition to the CleanCoverns, an additional glass or acrylic pane on the aquarium is highly recommended to keep seawater away from the LED bars.

Depending on the size of the aquarium, our first recommendation is always aquaLUMix, spotBEAM or powerBEAM SEAWATER. With this lighting, you get an ideally balanced spectrum on the one hand and a lot of power on the other. To achieve an even more dominant blue peak in the spectrum or even in the UV range, these lights can be wonderfully combined with the eco+ ROYAL BLUE or the PRO² with UV.

To achieve the same performance values with only the individual eco+ or PRO² LED bars, a large number of units would be necessary, which complicates the entire handling up to the control unit.

The following applies to the eco+ and PRO² LED bars: The light colours REEF (11,000K) and CORAL (50% white, 33% blue, 17% red) together with the light colours POLAR (7,500K), MARINE (13,000K) and ROYAL BLUE (460nm) form a wide range for the best possible lighting of marine aquariums. Depending on the requirements of the stock, an individual light mixture can be selected in this way. You would have to determine the final number yourself; depending on the requirements of the stock, a corresponding number of LED bars are used. As a rough guide, at least 50% of the conventional light output should be selected in LED. So, for example, if you used to use 100W tube lighting, you should now use at least 50W LED lighting.

If the aquaLUMix or PRO² LED bars are chosen and the heat recovery function is to be used, we strongly recommend using the TITAN extension.

Can LEDs also be used for lighting a terrarium?

Yes. Our LED lamps are so effective and bright that they can be used for terraristics. LED lighting with the PLANT-GROW, among other things, is recommended, especially with a view to the planting.

However, since an enormous variety of different animal species can be considered for a terrarium, the stocking should be given special consideration when selecting and purchasing the LEDs. For technical reasons, normal LEDs quickly lack the UVA range completely, so it makes sense to use an additional light source if your terrarium or animals need to die. For this purpose you will find the PRO² LED bar in the MIX variant UVA ✚ SKY-GROW - full spectrum 2.0. This is perfect for use in terraristics, please note the product description!

Advantage in addition to the power consumption: LEDs only develop a small amount of waste heat, whoever uses them as additional lighting does not have to pay attention to additional heat development in the terrarium. Thanks to the special sealing of our LED strips (protection class IP67), use in high humidity is also possible without any problems. The CleanCover is also strongly recommended here.

spotBEAM LED aquarium spotlights for focused illumination

A bright group of plants, light falling across a rock formation and quieter areas of shade between them: aquarium spotlights give you control over where the light falls. Use one spotBEAM for a selected area or arrange several above an open tank. Movement at the water surface creates the characteristic shimmer on plants, rocks and substrate.

Highlight one area or illuminate the whole aquarium

Interchangeable lenses determine how narrow or wide the beam is. A narrower beam concentrates light on a smaller area; a wider beam covers more of the surroundings. Mounting height also changes the area illuminated. For continuous coverage, choose the spacing, lenses and number of spotlights together.

Tank length alone does not tell you how many LED spotlights you need. Water depth, planting and shade from the layout matter too. Several lights spaced along a long aquarium may work better than a single central spotlight.

Light versions with three dimmable channels

FRESHWATER is intended for freshwater aquariums and SEAWATER for marine tanks. Both versions use a three-channel COB LED chip. Each channel can be dimmed independently to adjust brightness and the mix of light. A compatible lighting controller adds automatic sunrise and sunset transitions.

Plan mounting and power together

The compact housing measures 10 × 12 cm. An optional gooseneck attaches the spotlight to the aquarium rim and lets you position it over the tank. Check the mounting requirements and available space on the rim. The spotBEAM complete set lets you select lights, power supply, mounting and controller from the available options. This helps match the connections and power capacity to the number of lights planned.

Back to products ▲