Supported on the cover plate or glass struts on the aquarium, and between these, depending on the cover and the aquarium.
Lamp housing supported as a frame-mounted lamp.
Frame-mounted = supported on the cover plate or glass struts on the aquarium, and between these, depending on the cover and the aquarium. (See photos)
The correct housing length:
The supports increase the overall length of the housing by between +2.5cm and +22.5cm
Overall height:
The overall height is the height of the complete frame-mounted lamp from its support surfaces to the top of the lamp housing. There are 3 versions available:
- 66mm - Very suitable for aquariums without closed covers or with a glass cover.
- 44mm - For use below the cover, for supporting on glued-in glass strips or glass bridges, such as with EHEIM Incpiria aquariums, see photos.
- 37mm - The feet for this version are 23mm high, less than the height of the lamp housing itself. The support surface is 10cm lower than the underside of the lamp housing. This version is suitable for being supported in appropriately sized and positioned grooves, such as with EHEIM Proxima aquariums, see photos.
The feet are quite easy to shorten if a particular height is required.
Characteristics:
- Material: Aluminium
- Colour:
- Anodised matt black
- Anodised matt silver
- 2 supports are attached in location grooves at each end of the housing and can be placed anywhere along the sides of the aquarium
- Attached silicon feet ensure a gentle and slip-resistant seating
- Distance between the supporting surface to the underside of the housing: approx. 30mm to 76mm total height
Scope of supply:
- 4x supports incl. fastening screws
Videos
Login
Customers also bought
For easy bundling and guidance of cable lines.
Similar products
So you can be sure of the quickest possible start with your new lighting!
Side-mounted lamp = supported on the sides (glass edges) of the aquarium.
Unique lamp housing - individually and flexibly adjustable to your needs.
Unique lamp housing - individually and flexibly adjustable to your needs.
In deviation from the standard, this article can be cut to length according to individual customer requirements.
Additional holding bridges for individual mounting of several (shorter) LED bars
Side-mounted lamp = supported on the sides (glass edges) of the aquarium.
Side-mounted lamp = supported on the sides (glass edges) of the aquarium.
Connect two lamp housings next to one another
Lamp hanging freely above the aquarium, fastened by steel suspension wires to the ceiling.
Various lamp housings can be connected to one another and extended.
Customers also viewed
For mounting on the edge or a strut of the aquarium / terrarium.
Experience two individually controllable light colors. SUNSET creates a warm, plant-friendly ambiance, while DAY delivers a pure, natural light akin to a sunlit day. Lighting that captivates!
Tailored for luxuriant greenery. 4 unique light channels, ranging from tropical daylight to special effects for moonlight and solar cycles. With integrated Grow LEDs ensuring top-notch plant growth.
Simple, minimalist solution to place LED bars on longitudinal struts or cover plates.
Supported on the cover plate or glass struts on the aquarium, and between these, depending on the cover and the aquarium.
The LED adapter profile replaces your existing conventional T5 or T8 batten fittings 1 for 1
Bring your aquarium to life! Discover gentle sunrises and sunsets, individualized scenarios, and energy-efficient control in one device.
Unique lamp housing - individually and flexibly adjustable to your needs.
This product has a defect and is therefore offered as B-goods, further information in the product description.
With the POLAR light color (7500K), create a breathtaking, naturally-appearing white-blue glow. Ideal for Malawis and Tanganjika Cichlids. Experience the difference!
