The holders to allow our LED bars to be mounted in your existing waterproof tube sockets.
€13.99*
Available, delivery time: 1-3 days
These brackets are used to fix our LED bars in existing T5 or T8 moisture-proof sockets. Two versions are available: SOLO and DUO.
SOLO is used to fix one LED bar per tube.
The DUO brackets are used for mounting two LED bars per tube.
The brackets have a universal length, are mounted at the ends of the LED bar and can be extended and adjusted to the tube length if required. The table below shows which fluorescent tubes can be replaced with the respective LED bars. As a small highlight, the LED bars incl. holder can be rotated 360° in the tube sockets, so you can also set special accents if required, e.g. special lighting of the rear wall, etc.
Please note:
|
Fluorescent tubes |
...compatible with... |
eco+ LED bars |
PRO² LED bars |
|---|---|---|---|
|
361 to 438 |
... |
20cm, 30cm |
/ |
|
549 to 590 |
... |
20cm, 30cm, 50cm |
47cm |
|
849 to 895 |
... |
50cm, 80cm |
47cm, 67cm, 75cm |
|
1047 |
... |
80cm, 100cm |
75cm, 96cm |
|
1149 |
... |
100cm |
96cm, 106cm |
|
1200 |
... |
100cm, 116cm |
106cm |
|
1449 to 1500 |
... |
116cm, 120cm, 140cm |
135cm |
Suitable only for ordinary waterproof tube sockets! Not compatible with the aquaLUMix lights! The tube sockets may only be used in future as holders for LED bars! The previous power supply to your fluorescent tube lighting must be permanently disconnected and will not be needed in future! The power is supplied by an external LED mains adapter. (see Accessories) The supplied blue protective sleeves prevent the penetration of moisture and protect the electrical contacts of your fluorescent tube lighting sockets.
Scope of supply: 1 Pair Mounting rails, protective sleeves, fastenings
Possible configuration of the holders with LED bars: There are many different possible combinations. It is important that at least one LED bar forms a connection between the two mounting rails. The distance between the mounting rails varies according to the tube length and the LED bar.
Videos
Login
29 January 2024 10:42
alles gut
passt gut in die alten Fassungen
18 March 2020 10:14
Hat sich gelohnt
gut
22 March 2018 09:48
Passt perfekt
...in mein Juwel Rio 180. 2x80cm LED, 1x50cm LED in rot. TOP!
22 February 2017 08:32
super Qualität
Ich brauchte keine neue Abdeckung kaufen. Einfach die LED-Lampen an den Halterungen befestigen und das ging sehr gut. Die Halterungen gibt es auch für je Zwei LED-Lampen nebeneinander. So wird das Becken, je nach Wunsch - mit verschiedenen LED-Lampen gut ausgeleuchtet. Also alles Top !!!
14 August 2016 15:03
Einfacher geht es nicht
Super tolle Idee mit den Halterungen, sehr günstig und erfüllen Ihren Zwecken. Vorsicht bei Großen Becken (1,50m) passende Leiste Licht kaufen ! min 50 cm sonst ist eine Monatge nicht mehr möglich. Ich habe eine 80 cm Leiste gewählt habe ein Tanganjika Becken und brauche wenig licht. Für genügend Stabiliät sorgt sie jedoch um alle gut anbringen zu können ;-) Und ich fahre sie bei 20 % max :-)
14 September 2015 09:27
einfach genial
Wenig ist manchmal mehr! Passt perfekt und die Lichtleiste ist trotzdem schwenkbar.
22 July 2022 11:01
Funktional
Schnell montiert, Funktional in der Anwendung
11 August 2023 12:22
Perfekt passendes System
Perfekt passendes System
18 March 2020 10:12
Hat sich gelohnt
sehr gut
28 February 2018 09:30
Einfach und ohne großen Aufwand
Kann man nicht viel zu sagen außer: gut durchdacht, super einfach zu handhaben auch für "Nichthandwerker".
Customers also bought
The CleanCover protects the LED bar from limescale and dirt deposits and is very easy to clean. A splashwater protection, made of highly transparent, ultra-thin, impact-resistant plastic.
High-performance LED switching mains adapter for operating our LED lighting bars (12V DC)
High-performance LED switching mains adapter for operating our LED lighting bars (12V DC)
This distributor allows several LED lighting bars to be operated with a single mains adapter (assuming the power output is adequate).
The PLANT-GROW LED bar impresses with optimal light spectrums for remarkable plant growth and photosynthesis. A consistent, brilliant light that also intensifies the colorful brilliance.
Similar products
The holders to allow our LED bars to be mounted in your existing waterproof tube sockets.
The LED adapter profile replaces your existing conventional T5 or T8 batten fittings 1 for 1
The holders to allow our LED bars to be mounted in your existing waterproof tube sockets.
To replace light bars and cover flaps, the frame of the existing cover is still used.
Additional holding bridges for individual mounting of several (shorter) LED bars
The holders to allow our LED bars to be mounted in your existing waterproof tube sockets.
For easy bundling and guidance of cable lines.
With this set up to 6 eco+/PRO² LED bars can be easily fixed in the aquarium cover or the LED adapter profile for JUWEL and EHEIM aquariums.
Customers also viewed
The holders to allow our LED bars to be mounted in your existing waterproof tube sockets.
The holders to allow our LED bars to be mounted in your existing waterproof tube sockets.
The holders to allow our LED bars to be mounted in your existing waterproof tube sockets.
The PLANT-GROW LED bar impresses with optimal light spectrums for remarkable plant growth and photosynthesis. A consistent, brilliant light that also intensifies the colorful brilliance.
For individual use or for mounting up to 2 additional LED strips when using the T5/T8 holders or the DUO Adapter as a main holder.
To replace light bars and cover flaps, the frame of the existing cover is still used.
The LED adapter profile replaces your existing conventional T5 or T8 batten fittings 1 for 1
The lighting control system should be ready to go immediately? Then the "programming service" is just right for you!
The CleanCover protects the LED bar from limescale and dirt deposits and is very easy to clean. A splashwater protection, made of highly transparent, ultra-thin, impact-resistant plastic.
