The holders to allow our LED bars to be mounted in your existing waterproof tube sockets.
€13.99*
Delivery time, approx. 1-3 Working days
These brackets are used to fix our LED bars in existing T5 or T8 moisture-proof sockets. Two versions are available: SOLO and DUO.
SOLO is used to fix one LED bar per tube.
The DUO brackets are used for mounting two LED bars per tube.
The brackets have a universal length, are mounted at the ends of the LED bar and can be extended and adjusted to the tube length if required. The brackets can be easily and directly attached to the back of the LED bar by screwing the included self-tapping screws into the central groove of the bar.
The table below shows which fluorescent tubes can be replaced with the respective LED bars. As a small highlight, the LED bars incl. holder can be rotated 360° in the tube sockets, so you can also set special accents if required, e.g. special lighting of the rear wall, etc.
Please note:
|
Fluorescent tubes |
...compatible with... |
eco+ LED bars |
PRO² LED bars |
|---|---|---|---|
|
361 to 438 |
... |
20cm, 30cm |
/ |
|
549 to 590 |
... |
20cm, 30cm, 50cm |
47cm |
|
849 to 895 |
... |
50cm, 80cm |
47cm, 67cm, 75cm |
|
1047 |
... |
80cm, 100cm |
75cm, 96cm |
|
1149 |
... |
100cm |
96cm, 106cm |
|
1200 |
... |
100cm, 116cm |
106cm |
|
1449 to 1500 |
... |
116cm, 120cm, 140cm |
135cm |
Suitable only for ordinary waterproof tube sockets! Not compatible with the aquaLUMix lights! The tube sockets may only be used in future as holders for LED bars! The previous power supply to your fluorescent tube lighting must be permanently disconnected and will not be needed in future! The power is supplied by an external LED mains adapter. (see Accessories) The supplied blue protective sleeves prevent the penetration of moisture and protect the electrical contacts of your fluorescent tube lighting sockets.
Scope of supply: 1 Pair Mounting rails, protective sleeves, fastenings
Possible configuration of the holders with LED bars: There are many different possible combinations. It is important that at least one LED bar forms a connection between the two mounting rails. The distance between the mounting rails varies according to the tube length and the LED bar.
Videos
Login
1 - 10 of 52 reviews
22 August 2025 14:19
Die Solo Halterung ist durchdacht. Genial ist
Die Solo Halterung ist durchdacht. Genial ist die Konstruktion eines Montagesystems, das einerseits für die Montage in einer T5-Röhrenfassung und andererseits für eine T8-Röhre geeignet ist. So gibt es kein Problem, wenn der Kunde einen Fehler macht. Außerdem werden so die Materialbestände und der Lagerbestand begrenzt.
21 August 2024 17:58
Passt und ist einfach einzubauen.
Passt und ist einfach einzubauen.
1 June 2024 13:43
Gute Idee umgesetzt zum Umrüsten von T5
Gute Idee umgesetzt zum Umrüsten von T5 Leuchtbalken
2 April 2024 12:58
Auch als technischer Laie war es mir
Auch als technischer Laie war es mir mit den ausführlichen Beschreibungen in der Broschüre und im Internet sowie den Videoanleitungen problemlos möglich, die LED-Leisten in die T5-Halterungen einzubauen.
29 January 2024 10:42
alles gut
passt gut in die alten Fassungen
8 December 2023 20:22
Ideal zum Nachrüsten
Ideal zum Nachrüsten
11 August 2023 12:22
Perfekt passendes System
Perfekt passendes System
3 April 2023 14:54
Passt sehr gut und ist auch in
Passt sehr gut und ist auch in der Länge verstellbar.
22 March 2023 07:40
Gutes Produkt, Preis etwas zu hoch. Aquaristik
Gutes Produkt, Preis etwas zu hoch. Aquaristik ist eben nicht ganz günstig.
22 July 2022 11:01
Funktional
Schnell montiert, Funktional in der Anwendung
Dokumente zum Download
Customers also bought
Delivery time, approx. 1-3 Working days
Delivery time, approx. 1-3 Working days
Delivery time, approx. 1-3 Working days
Free shipping
Delivery time, approx. 1-3 Working days
The holders to allow our LED bars to be mounted in your existing waterproof tube sockets.
Delivery time, approx. 1-3 Working days
Are you unsure whether the selected products are compatible with each other or whether something important has been forgotten?
Delivery time, approx. 1-3 Working days
The CleanCover protects the LED bar from limescale and dirt deposits and is very easy to clean. A splashwater protection, made of highly transparent, ultra-thin, impact-resistant plastic.
This distributor allows several LED lighting bars to be operated with a single mains adapter (assuming the power output is adequate).
High-performance LED switching mains adapter for operating our LED lighting bars (12V DC)
Delivery time, approx. 1-3 Working days
Delivery time, approx. 1-3 Working days
Customers also viewed
The holders to allow our LED bars to be mounted in your existing waterproof tube sockets.
Delivery time, approx. 1-3 Working days
The holders to allow our LED bars to be mounted in your existing waterproof tube sockets.
Delivery time, approx. 1-3 Working days
The LED adapter profile replaces your existing conventional T5 or T8 batten fittings 1 for 1
Delivery time, approx. 1-3 Working days
So you can be sure of the quickest possible start with your new lighting!
Delivery time, approx. 1-3 Working days
Delivery time, approx. 1-3 Working days
Adapters to connect LED lamps and, if necessary, mains adapters manufactured by third parties to our dimmers, light control and daylight simulation systems.
DAY light color in emitting a pleasant, pure white light at 5500 Kelvin, it mimics the ambiance of a sunlit day. Elevate your lighting experience and craft mesmerizing visuals!
Delivery time, approx. 1-3 Working days
Delivery time, approx. 1-4 Working days
High-performance LED switching mains adapter for operating our LED lighting bars (12V DC)
Delivery time, approx. 1-3 Working days
Delivery time, approx. 1-3 Working days
Unique lamp housing - individually and flexibly adjustable to your needs.
Delivery time, approx. 1-3 Working days
