SunRiser 8, does not load, is not available, does not save or restarts sporadically?

If the SunRiser restarts sporadically, does not save settings, activates the LEDs unscheduled or does not load the web interface completely, there may be a defect (write/read error) on the SD card of the SunRiser.

In spite of several function tests by us before shipment, such an error of the MicroSD card can unfortunately not be avoided completely.

Solution 1

Often this problem can be solved with our factory tool. The internal SD card of the Suniser 8 is reformatted, the current firmware is installed and then your configuration is reloaded into the fresh system. If there are problems loading and restoring your configuration - please dispense with this point, repeat the process and select "no". After the restart, you can import your personal backup file in the usual way.

Let's go, open this link and follow the instructions/options.

http://sunriser.ledaquaristik.de/factory.html

Solution 2

If the above procedure is unsuccessful, you can alternatively open the SunRiser 8 and remove the MicroSD card.

See a photo at:http://srdemo.ledaquaristik.de/img/sdcard.jpg

Attention: Before you start, disconnect the power supply and disconnect all plugs of the LEDs.

Replacing the microSD card does not affect the guarantee or warranty, we consider this as regular use of the unit.

Now reformat the microSD card (FAT32, no quick formatting) and then save the firmware file "NEW.BEE" on the reformatted card. (You can also use another/new SD card of any size (from 2GB)).

Download the latest SunRiser 8 firmware ("NEW.BEE") at: http://sunriser.ledaquaristik.de/NEW.BEE.

Then insert the card back into the SunRiser 8 and close the unit. The firmware will be installed automatically when the unit is switched on and the SunRiser will restart. After the restart you can read in your personal backup file in the usual way.