CleanCover - glass/splashwater protection

Product information "CleanCover - glass/splashwater protection"

The optional CleanCover for PRO² LED bars provides splashwater protection and is made of highly transparent, ultra-thin, impact-resistant plastic. It also protects your LED bars from limescale and dirt deposits and is very easy to clean.

Recommended where LED bars are used within a closed, moist cover or on open aquariums without cover plates.

 

Advantages and characteristics:

  • Manufactured out of glassfibre-reinforced polycarbonate (PC). The material is impact-resistant, flexible, ultra-thin, UV-stable and highly transparent.
  • Keeps limescale and dirt deposits off the LED bar.
  • Makes cleaning simple and problem-free, with no risk of damaging the silicone coating.
  • Also suitable for use with mounting clips.
  • Installation: CleanCover clicks into the longitudinal groove in the LED bar. If mounting clips are used, CleanCover runs smoothly OVER them. Then the protective film must be removed.

 

Cleaning advice / tips:

  • Wash CleanCover with lukewarm water.
  • Dirt and other deposits can be removed with a soft cloth or sponge. A microfibre cloth moistened with plain water cleans well and is largely scratch-free.
  • Other suitable methods: Household cleaners such as vinegar (acetic acid)/vinegar essence diluted in water, mild soap solutions (detergents) or plastic cleaners approved for use on PC
  • Rinse with water and dry with a soft cloth to avoid water marks.
  • Any mechanical cleaning system, e.g. brushes etc., is not suitable because it will scratch the surface. The use of corrosive cleaning materials and sharp-edged objects must be avoided because they could damage or scratch the surface. Cleaners containing solvents can cause the surface to become matt.

 

8 of 8 reviews

4.75 out of 5 stars


75%

25%

0%

0%

0%


Leave a review!

Share your experiences with other customers.


28 March 2023 17:33

Einfach zu verbauen, die Zeit wird zeigen,

Einfach zu verbauen, die Zeit wird zeigen, wie schnell das Cover milchig wird, bis her keine Probleme, auch kalkflecken lassen sich einfach entfernen

26 December 2022 13:48

Gerne wieder

Wie immer alles super geklappt

7 August 2023 11:15

Super

Super kann Mann leichter sauber machen als die ganze lampe

11 March 2023 12:51

14 March 2023 10:09

Macht das, was es soll und nach

Macht das, was es soll und nach 2 Jahren immer noch nicht spröde. Sehr zu empfehlen

5 March 2023 08:19

Top Qualität

Top Qualität

3 July 2023 12:26

Tut genau das was es soll und

Tut genau das was es soll und ist einfach zu montieren. Einen Stern ziehe ich ab, weil meiner Meinung nach ist die Abdeckung ein Teil des LED Streifen und sollte mitgeliefert werden. Als Ersatzteil ist es aber gut.

29 August 2023 09:12

gute Qualität

sehr praktisch

Innovative Lighting: PRO² LED Bars Now in 67cm!

Illuminate your aquarium with our new PRO² LED bars – Perfect for 80cm tanks!

Customers also bought

M2.9x4.5mm screw
Self-tapping pan-head screw with point, cross-head Compatible: eco+ and PRO² LED bar, eco+ mounting clip, spacer, T5/T8 rails Material/colour: V2A stainless steel, silver-grey Price/piece
Product number: S5-2451

€0.06*
Retaining bridge (spare part)
Compatible with deLUX/pure cover Adapter profiles Lamp housing Price/piece
Product number: S2-0107

€2.99*
M2.9x9.5mm screw
Self-tapping pan-head screw with point, cross-head Compatible: eco+ and PRO² LED bar, eco+ mounting clip, spacer, T5/T8 rails Material/colour: V2A stainless steel, silver-grey Price/piece
Product number: S5-2951

€0.08*
4mm spacer
Used in the fastening of the LED bars for creating an offset between the LED bars and the mounting surface to provide better ventilation. Compatible: M2.9, M3 screws, eco+ mounting clip Material/colour: Polystyrene, black Price/piece
Product number: S4-0104

€0.08*
Spiral hose 100cm black

For easy bundling and guidance of cable lines.

Product number: 167-BK
Colour

€1.99*
PRO² LED bar SUNSET ✚ DAY

Experience two individually controllable light colors. SUNSET creates a warm, plant-friendly ambiance, while DAY delivers a pure, natural light akin to a sunlit day. Lighting that captivates!

Product number: 031-0467
Length

€77.99*
LED power supply 100W 12VDC - mains adapter

High-performance LED switching mains adapter for operating our LED lighting bars (12V DC)

Product number: 250-100
Power

Variants from €37.99*
€47.99*
Connections for water cooling / heat recovery

Silicone hose for supplying the water cooling.

Product number: 170-3m
Version

Variants from €2.99*
€6.99*
LED power supply 150W 12VDC - mains adapter

High-performance LED switching mains adapter for operating our LED lighting bars (12V DC)

Product number: 250-150
Power

Variants from €37.99*
€57.99*
Connections for water cooling / heat recovery

Silicone bow 180° for connecting flow and return.

Product number: 170-180
Version

€2.99*
CleanCover - glass/splashwater protection

The CleanCover protects the LED bar from limescale and dirt deposits and is very easy to clean. A splashwater protection, made of highly transparent, ultra-thin, impact-resistant plastic.

Product number: 190-0210
Version
Length

€0.99*

Similar products

Temperature sensor for SunRiser 8

For temperature monitoring, the sensor returns the temperature value of water and/or air to the SunRiser 8 in °C.

Product number: 158-TEMP

€29.99*
Connections for water cooling / heat recovery

Water supply for water cooling through a bypass in the existing water circuit of the filter system.

Product number: 170-1216
Version

Variants from €2.99*
€9.99*
Silicone buffer for covers with flip lid system, Flap
This silicone cube (11x11mm) serves as a buffer and for flush closing of the lid flaps, the underside is self-adhesive. Price/piece
Product number: S4-0106

€0.21*
230V Minipump for operating the water cooling system

A very small and economical pump for operating the water cooling. (230V)

Product number: 175-230
Version

€16.99*
Silicone handle for our covers, Black
Silicone handle for insertion into the lid elements offered by LEDaquaristik Price/piece
Product number: S4-0127

€2.99*
Set of silicone feet for PRO² LED bar

Simple, minimalist solution to place LED bars on longitudinal struts or cover plates.

Product number: 111-PRO
Version

€5.99*
T5 sleeve
The protective sleeves seal the waterproof tube sockets when they are taken out of use, i.e. when they are neither to be used for fluorescent tubes nor for LED bars. Price/piece
Product number: S4-0100

€0.99*
Height-adjustable support, double T
Height-adjustable support made of nylon. This is placed on the glass centre bar of the aquarium and prevents any sagging of the central profile with the cover. Useful for lengths from 180cm.
Product number: S4-0513

€9.99*
CleanCover - glass/splashwater protection

The CleanCover protects the LED bar from limescale and dirt deposits and is very easy to clean. A splashwater protection, made of highly transparent, ultra-thin, impact-resistant plastic.

Product number: 190-0467
Version
Length

€3.19*
Y-cable for SunRiser and DIMX6

For connecting 2 LED bars or 2 temperature sensors to one channel of a light control.

Product number: 158-SPLIT

€13.69*
for free
Current catalogue
Our printed version of the current catalogue contains: Product information about our product range Important notes on installation and commissioning Operating instructions and technical data*Postage only within Germany
Product number: K123

€0.00*
Push clamp 1:1
For connecting one wire, 2 push clamps are required for a 2-wire cable Compatible: 0.5-2.5mm cable Price/piece
Product number: S1-0214

€1.63*

Customers also viewed

CleanCover - glass/splashwater protection

The CleanCover protects the LED bar from limescale and dirt deposits and is very easy to clean. A splashwater protection, made of highly transparent, ultra-thin, impact-resistant plastic.

Product number: 190-0467
Version
Length

€3.19*
PRO² LED bar PLANT-GROW ✚ POLAR

Revolutionize your aquarium with the distinctive PLANT-GROW light color designed for optimal photosynthesis and vibrant colors, combined with the natural 7500K white-blue hue of POLAR. Be enchanted by the possibilities!

Product number: 039-0467
Length

€77.99*
TRIO holders for attaching to the cover

For mounting the LED lighting with minimal space, e.g. under the sliding cover.

Product number: 116-10
Version

€16.99*
Save energy!
Save energy!
Find out how LEDaquaristik lighting contributes noticeably to saving energy.