Powered by Smartsupp CleanCover - glass/splashwater protection

CleanCover - glass/splashwater protection

Product information "CleanCover - glass/splashwater protection"

The optional CleanCover for PRO² LED bars provides splashwater protection and is made of highly transparent, ultra-thin, impact-resistant plastic. It also protects your LED bars from limescale and dirt deposits and is very easy to clean.

Recommended where LED bars are used within a closed, moist cover or on open aquariums without cover plates.

 

Advantages and characteristics:

  • Manufactured out of glassfibre-reinforced polycarbonate (PC). The material is impact-resistant, flexible, ultra-thin, UV-stable and highly transparent.
  • Keeps limescale and dirt deposits off the LED bar.
  • Makes cleaning simple and problem-free, with no risk of damaging the silicone coating.
  • Also suitable for use with mounting clips.
  • Installation: CleanCover clicks into the longitudinal groove in the LED bar. If mounting clips are used, CleanCover runs smoothly OVER them. Then the protective film must be removed.

 

Cleaning advice / tips:

  • Wash CleanCover with lukewarm water.
  • Dirt and other deposits can be removed with a soft cloth or sponge. A microfibre cloth moistened with plain water cleans well and is largely scratch-free.
  • Other suitable methods: Household cleaners such as vinegar (acetic acid)/vinegar essence diluted in water, mild soap solutions (detergents) or plastic cleaners approved for use on PC
  • Rinse with water and dry with a soft cloth to avoid water marks.
  • Any mechanical cleaning system, e.g. brushes etc., is not suitable because it will scratch the surface. The use of corrosive cleaning materials and sharp-edged objects must be avoided because they could damage or scratch the surface. Cleaners containing solvents can cause the surface to become matt.

 

8 of 8 reviews

4.75 out of 5 stars


75%

25%

0%

0%

0%


Leave a review!

Share your experiences with other customers.


11 March 2023 12:51

14 March 2023 10:09

Macht das, was es soll und nach

Macht das, was es soll und nach 2 Jahren immer noch nicht spröde. Sehr zu empfehlen

5 March 2023 08:19

Top Qualität

Top Qualität

28 March 2023 17:33

Einfach zu verbauen, die Zeit wird zeigen,

Einfach zu verbauen, die Zeit wird zeigen, wie schnell das Cover milchig wird, bis her keine Probleme, auch kalkflecken lassen sich einfach entfernen

26 December 2022 13:48

Gerne wieder

Wie immer alles super geklappt

7 August 2023 11:15

Super

Super kann Mann leichter sauber machen als die ganze lampe

3 July 2023 12:26

Tut genau das was es soll und

Tut genau das was es soll und ist einfach zu montieren. Einen Stern ziehe ich ab, weil meiner Meinung nach ist die Abdeckung ein Teil des LED Streifen und sollte mitgeliefert werden. Als Ersatzteil ist es aber gut.

29 August 2023 09:12

gute Qualität

sehr praktisch

Customers also bought

M2.9x4.5mm screw
Self-tapping pan-head screw with point, cross-head Compatible: eco+ and PRO² LED bar, eco+ mounting clip, spacer, T5/T8 rails Material/colour: V2A stainless steel, silver-grey Price/piece
Product number: S5-2451

€0.06*
M2.9x9.5mm screw
Self-tapping pan-head screw with point, cross-head Compatible: eco+ and PRO² LED bar, eco+ mounting clip, spacer, T5/T8 rails Material/colour: V2A stainless steel, silver-grey Price/piece
Product number: S5-2951

€0.08*
Connections for water cooling / heat recovery

Silicone bow 180° for connecting flow and return.

Product number: 170-180
Version

€2.99*
4mm spacer
Used in the fastening of the LED bars for creating an offset between the LED bars and the mounting surface to provide better ventilation. Compatible: M2.9, M3 screws, eco+ mounting clip Material/colour: Polystyrene, black Price/piece
Product number: S4-0104

€0.08*
Retaining bridge (spare part)
Compatible with deLUX/pure cover Adapter profiles Lamp housing Price/piece
Product number: S2-0107

€2.99*
Connections for water cooling / heat recovery

Silicone hose for supplying the water cooling.

Product number: 170-3m
Version

Variants from €2.99*
€6.99*
LED power supply 100W 12VDC - mains adapter

High-performance LED switching mains adapter for operating our LED lighting bars (12V DC)

Product number: 250-100
Power

Variants from €37.99*
€47.99*
Spiral hose 100cm black

For easy bundling and guidance of cable lines.

Product number: 167-BK
Colour

€1.99*
Connections for water cooling / heat recovery

Y-piece for splitting the water cooling or for connecting several lamps.

Product number: 170-Y
Version

€2.99*
Silicone buffer for covers with flip lid system, Flap
This silicone cube (11x11mm) serves as a buffer and for flush closing of the lid flaps, the underside is self-adhesive. Price/piece
Product number: S4-0106

€0.21*
PRO² LED bar SUNSET 3500K

With the special SUNSET light color of 3500K, create a warm, plant-friendly ambience with a high red content. Combine for stunning daylight simulations and create the perfect scenario for your habitat.

Product number: 022-0467
Length

€72.99*

Similar products

Adapter for connecting to third-party products

Adapters to connect LED lamps and, if necessary, mains adapters manufactured by third parties to our dimmers, light control and daylight simulation systems.

Product number: 130-0000
Item

From €2.99*
3mm spacer
Used in the fastening of the LED bars for creating an offset between the LED bars and the mounting surface to provide better ventilation. Compatible: M2.9, M3 screws, eco+ mounting clip Material/colour: Polystyrene, black Price/piece
Product number: S4-0103

€0.08*
4mm spacer
Used in the fastening of the LED bars for creating an offset between the LED bars and the mounting surface to provide better ventilation. Compatible: M2.9, M3 screws, eco+ mounting clip Material/colour: Polystyrene, black Price/piece
Product number: S4-0104

€0.08*
Extension cable sold by the meter.
Rubberized premium cable, 4-core, for custom extension of the connection cables of our two-color PRO² LED bars.
Product number: 160-04
Version

Variants from €1.49*
€1.99*
Set of silicone feet for eco+ LED bar

Simple, minimalist solution to place LED bars on longitudinal struts or cover plates.

Product number: 111-eco
Version

€5.99*
Connections for water cooling / heat recovery

Reducer for the 230 V mini pump to the silicon hose.

Product number: 170-R
Version

€2.99*
Mounting plates stainless steel 71,5 x 30,0 x 3,0mm

Suitable for insertion into a corresponding carrier profile or lamp profile or for individual mounting.

Product number: 311-00

€9.99*
Replacement suction cup - Suction cup for mini pump
Suction cup as a replacement for our mini pump Price/piece
Product number: S4-0140

€0.49*
M2.9x9.5mm screw black
Self-tapping pan-head screw with point, cross-head Compatible: eco+ and PRO² LED bar, eco+ mounting clip, spacer, T5/T8 rails Material/colour: V2A stainless steel, black Price/piece
Product number: S5-2952

€0.07*
Extension cable sold by the meter.
Rubberized premium cable, 2-core, for custom extension of the connection cables of our single-color eco+ and PRO² LED bars.
Product number: 160-02
Version

€1.49*
M3x10mm screw+nut
Hex socket headed flange screw, self-locking nut Compatible: eco+ and PRO² LED bar, eco+ mounting clip, spacer, T5/T8 rails Material/colour: V4A stainless steel, silver-grey Price/piece
Product number: S5-3081

€0.35*
Height-adjustable pointed support
Height-adjustable support made of nylon. This is placed on the glass centre bar of the aquarium and prevents any sagging of the support profile with the deLUX cover. Practical for lengths starting at 120cm for Vario - Flap covers.
Product number: S4-0514

€9.99*

Customers also viewed

CleanCover - glass/splashwater protection

The CleanCover protects the LED bar from limescale and dirt deposits and is very easy to clean. A splashwater protection, made of highly transparent, ultra-thin, impact-resistant plastic.

Product number: 190-0210
Version
Length

€0.99*
Connections for water cooling / heat recovery

Water supply for water cooling through a bypass in the existing water circuit of the filter system.

Product number: 170-1622-1
Version

Variants from €2.99*
€4.99*
Lamp housing for LED lighting bars

Unique lamp housing - individually and flexibly adjustable to your needs.

Product number: 300-125-SI
Colour
Length

Variants from €33.99*
€95.99*
LED lighting for a 90cm aquarium | ➤ Configure Now
Complete set for a standard 90cm aquarium without further mounting, or optionally with silicone feet. Including light, dimmer, power supply and necessary accessories.
Product number: SS-SA090

€180.34*
flexBEAM LED-light
Product number: 101-0000

From €83.19*
Only 3 in stock
LED sample case - Decision support - Loan home

Test LEDs, light colors, fixtures, controls, etc. in the comfort of your own home to make the best buying decision for you!

Product number: 090-01
Version

€14.99*
plus €250.00 deposit
Save energy!
Save energy!
Find out how LEDaquaristik lighting contributes noticeably to saving energy.