140l corner aquarium with aquaLUMix Amazon-Grow 54 cm, SunRiser 8

After some deliberation, I decided on this configuration.
The topic of water cooling was new to me - here I had hesitated whether to use the mini pump or not. After installation, this is no longer a question. The pump is controlled via a free channel of the SunRiser 8 and runs silently. Dimmed to 80 % power, this is completely sufficient for effective cooling.
For the aquaLumix I have programmed a sunrise, moonlight and a so-called midday break based on the example configuration ("day planning"). However, the output of the two main channels is reduced to 90%, which is enough to trigger visible assimilation ("oxygen bubbles") in the ground covers, especially M. tweediei ("Montecarlo-3") after a short lighting period.
The web interface for setting the lighting times is really well designed.
In general, everything makes a very high-quality impression and ledaquaristik has put a lot of thought into user-friendliness; for example, the labelling of the channels and the polarity of the connections to the SunRiser are exemplary.
Freshwater variant or Amazon Grow?
That was also a question. Since the aquarium is heavily planted, it became "Amazon Grow" - and I really like the lighting mood it creates. Alternanthera reineckii "rosanervig" really comes into its own with it.

I am very satisfied.

Greetings from Lake Constance.

K. Sieber

Back

Related products

New

SunRiser 10 dimming control and daylight simulation

Create custom day and weather simulations with 10 channels, WiFi/LAN, and intuitive control – for a natural light experience and full lighting management.

€299.99*

Delivery time, approx. 1-3 Working days

aquaLUMix LED-light-bar AMAZON-GROW

Tailored for luxuriant greenery. 4 unique light channels, ranging from tropical daylight to special effects for moonlight and solar cycles. With integrated Grow LEDs ensuring top-notch plant growth.

Variants from €123.99*

€119.99*

Delivery time, approx. 1-3 Working days

Details

12V Minipump for operating the water cooling system

A very small and economic pump for operating the water cooling system. (12VDC)

Variants from €16.99*

€19.99*

Delivery time, approx. 1-3 Working days

Connections for water cooling / heat recovery

You can feed the water cooling system either through a bypass in your filter system's water circulation circuit or by means of a separate pump. Illustration of the connection by bypass 180° silicone bends for connecting the feed and return sides.Alternatively, several LED bars may be connected together. Cooling and warm water connections; hoses can be cut to length as required. Cooling water feed by bypass. Select an adapter (T-connector) that matches the existing hose system. Use the hose line that feeds the filtered water.Our recommendation: Alternatively, the cooling water can be supplied directly from the aquarium with a separate mini pump. This is usually safer and more reliable, as it is independent of the filter performance. See accessories: Mini pump Scope of delivery according to the selection made

€2.99*

Delivery time, approx. 1-3 Working days

Details