Heat-shrink solder connector for extending connection cables: Connect - solder - insulate - seal - in one simple working process.
€1.69*
Delivery time, approx. 1-3 Working days
Heat-shrink solder connector for extending connection cables:
Connect - solder - insulate - seal - in one simple working process.
Child's play! All done without a soldering iron or solder wire. The result is a watertight and more durable connection than with crimp connectors or screw terminals.
Scope of supply for eco+:
2 No. solder connectors
1 No. heat-shrink hose
Scope of supply for PRO²:
4 No. solder connectors
1 No. heat-shrink hose
Technical data:
Ingress protection type: IP67
Heat-shrink at: >110 C°
Temperature-resistance after shrinking: -45 °C to +125 °C
Length of solder connector: 40mm
Diameter 3mm, for cable cross-sections 0.5-0.75mm²
Instructions: Remove approximately 5 mm of insulation from the cables to be connected. Twist each of the bare cable ends and insert them, one from each side, until the ends lie parallel to one another under the silver ring (solder) in the middle of the connector. Heat the solder connector to approximately 110°C (it is best to use a hot-air gun, but it also can be done with care using a cigarette lighter etc.). The heat shrink sleeve reduces in diameter and sticks together, the solder melts completely and a watertight and very strong connection is produced. Hold the cable in position until the solder has cooled and become solid. The heat-shrink hose is transparent, which allows you to visually inspect the connection. Now shrink-on the supplied black heat-shrink hose around the whole connection for additional protection and to make it so the connection cannot be seen. AND THAT'S IT DONE.
Login
1 - 10 of 39 reviews
12 November 2025 07:41
Spitzenqualität
Spitzenqualität
12 September 2025 09:38
gut und einfach zu verarbeiten
gut und einfach zu verarbeiten
10 September 2024 07:39
Optimal
Die Verbinder der Kabelverlängerung waren sehr gut mit einer Heißluftpistole zu montieren. Obwohl ich dies zum ersten mal gemacht habe, war es sehr leicht.
1 June 2024 13:40
Notwendiges Zubehör
Notwendiges Zubehör
2 February 2024 14:03
Schwarzer schrumpfschlauch ist top. Der bunte zum
Schwarzer schrumpfschlauch ist top. Der bunte zum verlöten geht nicht ganz so gut
8 December 2023 22:11
gut
gut
14 November 2023 10:28
Das verlöten hat nicht ganz so gut
Das verlöten hat nicht ganz so gut funktioniert! Aberdas schrumpfen funktioniert einwandfrei.
25 August 2023 08:07
Die Verbinder zur Kabelverlängerung sind sehr einfach
Die Verbinder zur Kabelverlängerung sind sehr einfach zu benutzen. Heißluftfön reicht!
21 June 2023 16:46
Von gewohnter Qualität!
Von gewohnter Qualität!
2 May 2023 10:55
Funktionell
Tolle Sache mit den Verbindern, hat alles funktioniert
Dokumente zum Download
Customers also bought
Delivery time, approx. 1-3 Working days
Delivery time, approx. 1-3 Working days
Delivery time, approx. 1-3 Working days
Delivery time, approx. 1-3 Working days
This distributor allows several LED lighting bars to be operated with a single mains adapter (assuming the power output is adequate).
