Holders for T5/T8 waterproof tube sockets

The holders to allow our LED bars to be mounted in your existing waterproof tube sockets.

There are two versions available, one for T5 and one for T8 sockets:

1 Set SOLO: For one LED bar per tube

1 Set DUO: For two LED bars per tube (only eco-+)

The holders are all the same length and can be withdrawn from the socket to the appropriate extent. The table below shows which fluorescent tubes can be replaced by which LED bars. A small refinement is that the LED bars including the holders may be rotated through 360° in the tube sockets. In this way you can set a special lighting accent, such as highlighting the back of the tank etc.

Please note:

The tube sockets may only be used in future as holders for LED bars! The previous power supply to your fluorescent tube lighting must be permanently disconnected and will not be needed in future! The power is supplied by an external LED mains adapter. (see Accessories) The supplied blue protective sleeves prevent the penetration of moisture and protect the electrical contacts of your fluorescent tube lighting sockets.

Scope of supply: Mounting rails, protective sleeves, fastenings

Suitable only for ordinary waterproof tube sockets!

Not compatible with the aquaLUMix lights!

Possible configuration of the holders with LED bars: There are many different possible combinations. It is important that at least one LED bar forms a connection between the two mounting rails. The distance between the mounting rails varies according to the tube length and the LED bar.