LED lamps as replacements for 80W HQL or HQI lamps for the illumination of aquariums. They contain 12 ultra-bright Epistar LEDs.
You do not need a ballast, only an ordinary lamp fitting with an E27 socket
Suitable for all aquariums, including perch, malawi, discus and community aquariums. And for more intensively planted Amazonian tanks with the appropriate number of lamps.
In addition, they create a splendid shimmering effect on the bottom; the interaction of light and waves, just as in nature.
Choose from 5 different light colours.
|SUNSET 3000 Kelvin
Warm light with a high proportion of red, advantageous for planted aquariums.
|approx. 2100 lm
||approx. 105 lm/W
|TROPIC 4000 Kelvin
Slightly warm, tropical light, advantageous for rare planted aquariums
|approx. 2250 lm
||approx. 113 lm/W
|PLANT (8x 6000K, 4x 3000K)
||A combination of 8x DAY 6000K and 4x 3000K, suitable for planted freshwater aquariums.
||approx. 2370 lm
||approx. 118 lm/W
|DAY 6000 Kelvin
A pleasant, pure white light, very natural looking, for mostly unplanted aquariums, like east-africa habitats
|approx. 2500 lm
||approx. 125 lm/W
|SPECIAL REEF (8x 12000K, 4x blue 450-470nm)
A combination of 8x white 12000K and 4x blue 450-470nm, suitable for seawater aquariums.
|approx. 2200 lm
||approx. 110 lm/W
- Dimensions: d=122mm, h=127mm
- Configuration: 12x Epistar LEDs
- Dimmable: NO
- Socket: E27
- Beam angle: 90°
- Output: 20W
- Weighted energy consumption: 20kWh/1000h
- Voltage: 230V
- Service life: > 30,000 hours (= more than 8 years assuming 10 hours lighting per day)
- Switching cycles until premature failure: approx. 100,000
- Switch-on time: 0.5s
Epistar Corporation is one of the biggest manufacturers of light-emitting diodes (LEDs) in Taiwan. The company was formed in 1996 and specialises in high-brightness LED products to a high quality standard.
These LED lamps cool themselves through the surrounding air. You should therefore ensure that the heat generated by the lamps can be given off freely. If the lamps are used in a congested or sealed housing, they may fail prematurely because of the higher operating temperature.