Adapters to connect LED lamps and, if necessary, mains adapters manufactured by third parties to our dimmers, light control and daylight simulation systems.
Adapters for connecting LED lights and possibly power supplies from third-party manufacturers to our day simulators, light controllers, or dimmers.
The selection includes the following adapter :
- Set for connecting a light with a common +pole to the SunRiser 4+
(Includes 1 piece 5-way clamp, 4 pieces connection cables)
CONNECTION
The connection of lighting and power supply to our controllers is made without plugs. The SunRiser controllers have plug-in screw terminals, to which the cables of lighting or power supply are directly clamped. To avoid cutting off your existing plugs, we offer suitable adapters.
The individual channels of the SunRiser controllers are each occupied with the +pole and -pole of your lighting. If you want to connect multicolored lighting that has a common +pole, it must be divided among the appropriate number of channels/colors/-poles. Also, the maximum power (per channel or total) of the respective controller must be considered, see product description or overview of light controllers.
The power supply is provided with ONE power supply compatible with the lighting. Voltage 12 to 24VDC.
Attention: Mixed operation of 12V, 20V, and/or 24V products is not possible! Either or!
OVERVIEW
| Product | Voltage | Compatible with LEDaquaristik Power Supply 12VDC? | Usable with LEDaquaristik Controller/Dimmer? | Adapter available? |
|---|---|---|---|---|
| Aquatlantis Easy LED | 24V | No | Yes | Yes |
| Daytime eco/Cluster | 12V | Yes | Yes | Yes |
| Econlux SolarStinger SunStrip | 24V | No | Yes | No** |
| EHEIM classicLED | 24V | No | Yes | No** |
| EHEIM PowerLED | 12V | Yes | Yes | Yes |
| EHEIM PowerLED+ | 24V | No | Yes | Yes |
| JUWEL HeliaLUX | 20V | No | Yes | No** |
| JUWEL NovoLux LED | 24V | No | Yes | Yes |
| SERA X-Change | 20V | No | Yes | Yes |
*Adapter may be necessary, see CONNECTION | **Plug can be removed for direct connection to the controller. See below for polarity and cable colors.
Polarity and Cable Colors
| EHEIM Power Plus | |
| Blue | PLUS |
| Brown | MINUS CH1 |
| Yellow | MINUS CH2 |
| Green | MINUS CH3 |
Connecting an RGB lighting using the example of an Econlux SolarStinger Fresh 35.
This is an RGBW LED lighting, i.e., RGB LEDs (Red, Green, Blue) and W for single-color white LEDs. Thus, this model has a total of 4 separately controllable channels/light colors. Since the power supply is permanently connected to the lamp, the cable must be cut and connected to the light controller (SunRiser 4+ or 8). It is a 6-core cable configured as follows:
- Brown = Plus
- White = Minus (white light)
- Red = Minus (red light color of the RGB)
- Green = Minus (green light color of the RGB)
- Blue = Minus (blue light color of the RGB)
- Yellow = Minus (not used here, possibly UV light in other models)
Connecting a Juwel HeliaLux to the SunRiser 2XL. The light colors White and Blue are thus separately dimmable and controllable.
This involves a 3-core cable configured as follows:
- Brown = Plus
- Gray = Minus (white light)
- Blue = Minus (blue light)
Login
7 reviews
3 February 2024 10:37
Es ist verwirrend, dass rotes Kabel minus
Es ist verwirrend, dass rotes Kabel minus und schwarzes Kabel plus ist, sonst erfüllt es seine Funktion.
3 February 2024 10:33
Passt perfekt!
Passt perfekt!
3 February 2024 10:31
Alles passt und lässt sich gut umbauen.
Alles passt und lässt sich gut umbauen.
3 February 2024 10:29
Passt perfekt!
Passt perfekt!
29 December 2023 09:50
Super Produkt und erstklassige Qualität!
Wie erwartet, super Produkt. Immer wieder gerne!
10 August 2023 06:56
Hat sehr gut funktioniert.
Hat sehr gut funktioniert.
10 August 2023 06:56
Hat sehr gut funktioniert.
Hat sehr gut funktioniert.
Dokumente zum Download
Customers also bought
Delivery time, approx. 1-3 Working days
Delivery time, approx. 1-3 Working days
Heat-shrink solder connector for extending connection cables: Connect - solder - insulate - seal - in one simple working process.
Delivery time, approx. 1-3 Working days
The CleanCover protects the LED bar from limescale and dirt deposits and is very easy to clean. A splashwater protection, made of highly transparent, ultra-thin, impact-resistant plastic.
Delivery time, approx. 1-3 Working days
Simple, minimalist solution to place LED bars on longitudinal struts or cover plates.
Delivery time, approx. 1-3 Working days
Make every day special! Simulate everything from moonlight to sunrise, providing a natural environment for your fish.
Delivery time, approx. 1-3 Working days
Customers also viewed
Adapters to connect LED lamps and, if necessary, mains adapters manufactured by third parties to our dimmers, light control and daylight simulation systems.
Make every day special! Simulate everything from moonlight to sunrise, providing a natural environment for your fish.
Delivery time, approx. 1-3 Working days
Bring your aquarium to life! Discover gentle sunrises and sunsets, individualized scenarios, and energy-efficient control in one device.
Delivery time, approx. 1-3 Working days
Adapters to connect LED lamps and, if necessary, mains adapters manufactured by third parties to our dimmers, light control and daylight simulation systems.
Adapters to connect LED lamps and, if necessary, mains adapters manufactured by third parties to our dimmers, light control and daylight simulation systems.
Delivery time, approx. 1-3 Working days
Delivery time, approx. 1-3 Working days
Unique lamp housing - individually and flexibly adjustable to your needs.
Delivery time, approx. 1-3 Working days
Delivery time, approx. 1-3 Working days
Create custom day and weather simulations with 10 channels, WiFi/LAN, and intuitive control – for a natural light experience and full lighting management.
Delivery time, approx. 1-3 Working days
Delivery time, approx. 1-3 Working days
Delivery time, approx. 1-3 Working days
