Go to homepage
Wishlist
Shopping cart €0.00

PRO² LED Lighting for 150cm Aquarium | Complete Set

Skip image gallery
PRO²
% Set
PRO² LED Lighting for 150cm Aquarium | Complete Set
PRO² LED Lighting for 150cm Aquarium | Complete Set
PRO² LED Lighting for 150cm Aquarium | Complete Set
PRO² LED Lighting for 150cm Aquarium | Complete Set
PRO² LED Lighting for 150cm Aquarium | Complete Set
PRO² LED Lighting for 150cm Aquarium | Complete Set
PRO² LED Lighting for 150cm Aquarium | Complete Set
PRO² LED Lighting for 150cm Aquarium | Complete Set
PRO² LED Lighting for 150cm Aquarium | Complete Set

2 Configure your set individually

The matching set is already preconfigured for your aquarium.

Review the selection and adjust the included components individually if required.

Review & adjust configuration

€0.00

Ready for dispatch in 1-3 buisness days

€0.00

Prices incl. VAT plus shipping costs

Product number: P-ALL150

Everything included – perfectly matched

The complete set is preconfigured for your aquarium and ready to use immediately after installation. You can adjust the included components individually if required.
The set can also be expanded at a later date, provided that the power supply and mounting system are sufficiently dimensioned.
For a completely custom setup, you can select the required components individually in our shop.

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Information on the manufacturer (information obligations under the GPSR Product Safety Regulation)
LEDaquaristik GmbH
Schierbusch 2
33161 Hövelhof, Deutschland
+49 5257 93 666 50
info@ledaquaristik.de

2 This set can be configured individually

Set overview – configure the components below
LED bars
CleanCover
Heating with light
Connection materials for operating the water cooling system
Mounting
3M Adhesion Promoter Set
Power
Operating Mode
Manual Dimmers
Manual Dimmers
LED Splitter for SunRiser 2XL
Service
LED bars

Choose LED bars, depending on the lighting needs of your aquarium or the desired extent of a potential day simulation.
Guidance: Sunrise effect with, for example, SUNSET; daylight colors can include TROPIC, DAY, SKY, and/or POLAR. For enhanced plant growth, use PLANT-GROW; for effect colors, choose BLUE (moonlight) and RED (dawn). Note: The higher the K-value (Kelvin), the cooler the light color. For instance, SUNSET is 3500K (warm white), while POLAR is 7500K (cool white).
Lighting requirements: Typically, one LED bar is sufficient for standard needs, while more demanding setups may require up to two LED bars. Please note that the dual-color LED bars have individually controllable light colors, which means you will need two channels on the controller to operate them separately.

PRO² LED bar SUNSET ✚ POLAR Length: 135cm (1354mm)
PRO² LED bar SUNSET ✚ POLAR Length: 135cm (1354mm)
€0.00

PRO² LED bar POLAR ✚ MARINE Length: 135cm (1354mm)
PRO² LED bar POLAR ✚ MARINE Length: 135cm (1354mm)
€0.00

CleanCover

A recommended protective cover – please adjust the quantity according to the number of LED bars!

Length: 135cm / Version: PRO²
Length: 135cm / Version: PRO²
€0.00

Heating with light

Each PRO² LED bar can optionally be used with the innovative heat recovery system, though it is not mandatory. The temperature-optimized aluminum profile provides effective passive cooling even without this technology.
With the active water cooling system, not only is optimal cooling of the LEDs achieved, but the waste heat is also efficiently utilized to additionally heat the aquarium through heat recovery. Our calculation tool shows the potential of heat recovery.

With heat recovery via water cooling
With heat recovery via water cooling
€0.00

Without heat recovery via water cooling
Without heat recovery via water cooling
€0.00

Connection materials for operating the water cooling system

Supply the water cooling system with a separate mini pump (controllable via the light controller) that circulates the aquarium water through the LED bar(s). Multiple LED bars can also be connected in series. The 180° silicone bend is used to connect the inlet and outlet of the LED bar, allowing the water to return. Ultimately, the water flows back into the aquarium after one complete cycle. Cleaning brushes are included for occasional maintenance to ensure optimal performance at all times.

Connections for water cooling / heat recovery Version: 180° silicone bow (separate)
Connections for water cooling / heat recovery Version: 180° silicone bow (separate)
€0.00

Connections for water cooling / heat recovery Version: 3 Meter silicone hose (separate)
Connections for water cooling / heat recovery Version: 3 Meter silicone hose (separate)
€0.00

12V Minipump for operating the water cooling system Version: 12VDC | controllable
12V Minipump for operating the water cooling system Version: 12VDC | controllable
€0.00

Cleaning brush set for water cooling
Cleaning brush set for water cooling
€0.00

Mounting

Magnetic Mounting Inside the Aquarium Hood: The magnetic mounting brackets are either bonded or screwed into place, depending on the type of hood, providing a secure and flexible installation. The LED light bar can be removed and reinstalled at any time with a single hand. Ultra-slim design: The total installation height, including the LED light bar, is only 22 mm, making it ideal for aquariums with limited installation space. Optional Adhesion Promoter: Improves adhesion on many plastic surfaces.
 
Silicone stands: A simple, minimalist solution for setting up LED bars on longitudinal struts or cover panes.
 
TRIO bracket: Up to 2 LED bars can be attached to the bracket, which is then hung within the frame of the cover. Consequently, if more than 2 LED bars are used, 2 of the TRIO brackets are needed.

Magnetic and Self-Adhesive Universal Mount for LED Bars
Magnetic and Self-Adhesive Universal Mount for LED Bars
€0.00

Set of silicone feet for PRO² LED bar Version: PRO²
Set of silicone feet for PRO² LED bar Version: PRO²
€0.00

TRIO holders for attaching to the cover Stability: standard (2mm)
TRIO holders for attaching to the cover Stability: standard (2mm)
€0.00

Reset choice
Reset choice

€0.00

3M Adhesion Promoter Set

For the optimal preparation of plastic surfaces before bonding the magnetic mounting brackets. Improves the adhesion of the adhesive pads and ensures a durable, secure, and long-lasting bond.

3M Adhesion Promoter Kit for Plastic Surfaces
3M Adhesion Promoter Kit for Plastic Surfaces
€0.00

Reset choice
Reset choice

€0.00

Power

200W for up to 3 LED bars
264W for up to 4 LED bars

Good to know: The specified power rating (Watts) of the power supply does not reflect the actual energy consumption of the lighting. The actual power usage is solely determined by the connected LED bars and the brightness set via the dimmer or lighting control. For example, the energy consumption of a 50W LED setup remains 50W, whether a 100W or 200W power supply is used. However, with a dimmer, the brightness—and consequently the power consumption—of the LED bars can be adjusted and reduced.

Power: 200W
Power: 200W
€0.00

Power: 264W
Power: 264W
€0.00

Operating Mode

LED Splitter: Connect up to 6 LED bars directly to the power supply for on/off operation. (=always 100% power)
Lighting Controls: Time-programmable lighting sequences, smooth dimming transitions, sunsets, moonlight, depending on the device and LED light colors.
Please note that the connections for LED bars on the lighting controllers are limited: SunRiser 2XL (2), SimuLUX 24 (5), SunRiser 6 (6). If needed, LED splitters or Y-cables for multiple or dual usage of the connections must be ordered separately. Please refer to the product description of the lighting controllers for details.

LED Splitter – Multi-Channel Distributor for a Single Power Supply
LED Splitter – Multi-Channel Distributor for a Single Power Supply
€0.00

SunRiser 10 dimming control and daylight simulation
SunRiser 10 dimming control and daylight simulation
€0.00

SunRiser 2 XL dimming control and daylight simulation
SunRiser 2 XL dimming control and daylight simulation
€0.00

SimuLUX 24 dimming control and daylight simulation
SimuLUX 24 dimming control and daylight simulation
€0.00

SunRiser 6 dimming control and daylight simulation
SunRiser 6 dimming control and daylight simulation
€0.00

Reset choice
Reset choice

€0.00

Manual Dimmers

1K Dimmer: Dim all connected LED bars together with a rotary knob or by remote control. Only in conjunction with the LED splitter or just one LED bar.
DIMIX6: Up to 6 LED bars can be dimmed separately by hand. Only selectable without an LED splitter.

LED dimmer (manual 1-channel stepless) Dimming: with remote control
LED dimmer (manual 1-channel stepless) Dimming: with remote control
€0.00

LED dimmer (manual 1-channel stepless) Dimming: with rotary knob
LED dimmer (manual 1-channel stepless) Dimming: with rotary knob
€0.00

Manual Dimmers

1K Dimmer: Dim all connected LED bars together with a rotary knob or by remote control. Only in conjunction with the LED splitter or just one LED bar.
DIMIX6: Up to 6 LED bars can be dimmed separately by hand. Only selectable without an LED splitter.

LED dimmer (manual 1-channel stepless) Dimming: with rotary knob
LED dimmer (manual 1-channel stepless) Dimming: with rotary knob
€0.00

LED dimmer (manual 1-channel stepless) Dimming: with remote control
LED dimmer (manual 1-channel stepless) Dimming: with remote control
€0.00

DIMIX6 - manual 6-channel LED dimmer
DIMIX6 - manual 6-channel LED dimmer
€0.00

LED Splitter for SunRiser 2XL

More than 2 LED bars? The SunRiser 2XL allows multiple LED bars to be connected to its two outputs using LED splitters. All LED bars are synchronized per channel, with support for up to 120 W (12 V) per channel.

LED Splitter – Multi-Channel Distributor for a Single Power Supply
LED Splitter – Multi-Channel Distributor for a Single Power Supply
€0.00

Service

We are happy to thoroughly review your order before shipping to ensure that all necessary components for operation are included. If there is any issue that might prevent the basic functionality, we will reach out to you!
Do you want the lighting control to be ready for immediate use, exactly according to your preferences? Then our "Programming Service" is just what you need!

Programming: SimuLUX / Range: Day planning
Programming: SimuLUX / Range: Day planning
€0.00

Programming: SunRiser 10 / Range: Day planning
Programming: SunRiser 10 / Range: Day planning
€0.00

Programming: SunRiser 2XL / Range: Day planning
Programming: SunRiser 2XL / Range: Day planning
€0.00

Programming: SunRiser 6 / Range: Day planning
Programming: SunRiser 6 / Range: Day planning
€0.00

Service feature: order check
Service feature: order check
€0.00

Skip product gallery

Useful Add-ons

Adapter cable 12VDC PWM for mini pump
Adapter cable 12VDC PWM for mini pump

This is a spare part, this adapter cable is already included in the scope of delivery of the 12VDC mini pump. This adapter cable is absolutely necessary for operating the 12VDC mini pump (item 175-500) on a light control unit (SunRiser 2+, 2XL, 6, 8 or SIMU-LUX). When connecting, it is essential to observe the polarity of the connection, otherwise there is a risk of immediate defect. (Red=PLUS, Black=MINUS) It is not possible to operate the CO2 valve and the mini pump at the same output of a light control unit and this can lead to a defect in the light control unit.

€4.99

Ready for dispatch in 1-2 buisness days

12V Minipump for operating the water cooling system
12V Minipump for operating the water cooling system

A very small and economic pump for operating the water cooling system. (12VDC)

Version

Variants from €16.99
€19.99

Ready for dispatch in 1-2 buisness days

90° connector for mini pump
90° connector for mini pump

For connecting the hose to the 12V mini pump. Not compatible with other pumps.

€2.59

Ready for dispatch in 1-2 buisness days

CleanCover - glass/splashwater protection
CleanCover - glass/splashwater protection

The CleanCover protects the LED bar from limescale and dirt deposits and is very easy to clean. A splashwater protection, made of highly transparent, ultra-thin, impact-resistant plastic.

Version
Length

€3.19

Ready for dispatch in 1-2 buisness days

for free
Service feature: order check
Service feature: order check

Are you unsure whether the selected products are compatible with each other or whether something important has been forgotten?

€0.00

Ready for dispatch in 1-2 buisness days

LED power supply 200W 12VDC - mains adapter
LED power supply 200W 12VDC - mains adapter

High-performance LED switching mains adapter for operating our LED lighting bars (12V DC)

Power

Variants from €47.99
€67.99

Ready for dispatch in 1-2 buisness days

M2.9x4.5mm screw
M2.9x4.5mm screw

Self-tapping pan-head screw with point, cross-head Compatible: eco+ and PRO² LED bar, eco+ mounting clip, spacer, T5/T8 rails Material/colour: V2A stainless steel, silver-grey Price/piece

€0.06

Ready for dispatch in 1-2 buisness days

Quality from Germany
Complete sets at a discount price
TOP Service & Consultation
Shipping within 24h
Hotline +49 5257 93 666 50
Let real projects inspire you: