€9.99
Ready for dispatch in 1-2 buisness days
Our magnetic universal mounting system allows LED light bars to be installed quickly, securely, and with maximum flexibility – without complicated installation. It provides a versatile mounting solution and is ideal for customized aquarium lighting setups.
The set includes two magnetic pairs (2 × 2 magnets). The magnets without adhesive pads are securely fastened to the LED light bar using screws. The matching counterparts with adhesive pads are attached to the aquarium cover or another suitable surface, depending on the installation. Alternatively, the counterparts can also be secured using the countersunk center hole if a mechanical screw mounting is preferred or required.
Ideal for Maintenance and Cleaning
The magnetic mounting system allows the LED light bars to be removed in just a few seconds whenever needed and reattached just as easily. This provides more space for cleaning and maintenance inside the aquarium and also makes it easy to reposition the lighting later – without drilling new holes or applying new adhesive.
Thanks to its particularly slim design, the mounting system adds only 10 mm in height, plus the thickness of the LED light bar. This keeps the installation discreet and space-saving.
Also ideal for many entry-level aquarium kits that offer only limited mounting options, such as the Eheim aquastar or Juwel Primo.
The mounting system has been specifically designed for aquarium use and is fully encapsulated in plastic. The material is food-safe, permanently water-resistant, and completely safe for fish, plants, and invertebrates.
Compatible with:
- eco+ LED light bars
- PRO² LED light bars
The magnets are equipped with a high-strength 3M™ industrial adhesive pad. Since the material and surface characteristics of individual aquarium covers may vary, we cannot guarantee adhesion on customer-provided surfaces.
For optimum adhesion, the mounting surface must be clean, grease-free, and completely dry. Press the adhesive pad firmly into place after application. Maximum bond strength is achieved after approximately 72 hours.
For plastics that are difficult to bond, we recommend using our optional 3M™ Adhesion Promoter Set (Item No. S4-220P). The included primer significantly improves the adhesion of the adhesive pad on many plastic surfaces.
Not suitable for dirty, textured, silicone-contaminated, or poorly bonded surfaces.
Technical Specifications
- Diameter: 17 mm
- Total height (2 magnets + adhesive pad): 10 mm
- Color: Black
- Holding force per magnetic mount: approx. 1,000 g (depending on the mounting surface)
Package Contents
1 set = 2 complete magnetic mounts (2 × magnet with screw, 2 × magnet with adhesive pad)
Login
Dokumente zum Download
Useful Add-ons
Self-tapping countersunk sheet metal screw with sharp point, Phillips driveCompatible with: Magnetic universal mount for LED barsMaterial/Color: V4A stainless steel, silver-greyPrice per piece
Ready for dispatch in 1-2 buisness days
High-performance LED switching mains adapter for operating our LED lighting bars (12V DC)
Ready for dispatch in 1-2 buisness days
This distributor allows several LED lighting bars to be operated with a single mains adapter (assuming the power output is adequate).
Ready for dispatch in 1-2 buisness days
Ready for dispatch in 1-2 buisness days
Optimize the adhesion of adhesive pads to plastic surfaces with the 3M Adhesion Promoter Set. The included adhesion promoter (primer) improves the bond between the adhesive pad and the substrate, significantly increasing the long-term durability of the adhesive connection. This set is particularly suitable for preparing aquarium covers and other plastic surfaces for the installation of our magnetic mounting brackets. Easy Application Thoroughly clean and dry the surface. Put on and use the disposable glove. Evenly apply the included primer wipe to the desired bonding area. Allow the adhesion promoter to flash off for 1–5 minutes. Apply the adhesive pad or magnetic mount and press firmly into place. For optimum bonding performance, the adhesive joint should not be subjected to load for at least 24 hours after application. Maximum bond strength is achieved after up to 72 hours. Package Contents 1x 3M adhesion promoter (primer) saturated wipe 1x disposable glove Safety Information The adhesion promoter must not be applied directly on or above the aquarium. Remove the aquarium cover before treatment and carry out the application in a well-ventilated area away from the aquarium. Treated parts should only be reinstalled above the aquarium after the primer has completely flashed off and dried. The adhesion promoter is designed to improve adhesive performance and may cause permanent changes to certain surfaces. Color changes, dulling, gloss variations, or other visual alterations may occur in the treated area. We recommend testing compatibility on an inconspicuous area before application. Note The achievable bond strength depends on the material, surface condition, cleanliness, and environmental conditions. Adhesion may be reduced on heavily textured, contaminated, or otherwise unsuitable surfaces. If required, our magnetic mounts can alternatively be secured using screws.
Ready for dispatch in 1-2 buisness days
