The LED adapter profile replaces your existing conventional T5 or T8 batten fittings 1 for 1
Ready for dispatch in 1-2 buisness days
For mounting the LED lighting with minimal space, e.g. under the sliding cover.
Ready for dispatch in 1-2 buisness days
For mounting up to 6 LED bars on the original aquatlantis / tecatlantis support profile.
Ready for dispatch in 1-2 buisness days
For mounting up to 6 LED bars on the original aquatlantis / tecatlantis support profile.
Ready for dispatch in 1-2 buisness days
For mounting up to 6 LED bars on the original aquatlantis / tecatlantis support profile.
Ready for dispatch in 1-2 buisness days
The holders to allow our LED bars to be mounted in your existing waterproof tube sockets.
Ready for dispatch in 1-2 buisness days
The holders to allow our LED bars to be mounted in your existing waterproof tube sockets.
Ready for dispatch in 1-2 buisness days
The holders to allow our LED bars to be mounted in your existing waterproof tube sockets.
Ready for dispatch in 1-2 buisness days
The holders to allow our LED bars to be mounted in your existing waterproof tube sockets.
Ready for dispatch in 1-2 buisness days
For individual use or for mounting up to 2 additional LED strips when using the T5/T8 holders or the DUO Adapter as a main holder.
Ready for dispatch in 1-2 buisness days
With this set, up to 6 eco+/PRO² LED bars can be easily mounted in the Flap aquarium cover or in the LED adapter profile for JUWEL and EHEIM aquariums.
Ready for dispatch in 1-2 buisness days
```html Our magnetic universal mounting system allows LED light bars to be installed quickly, securely, and with maximum flexibility – without complicated installation. It provides a versatile mounting solution and is ideal for customized aquarium lighting setups. The set includes two magnetic pairs (2 × 2 magnets). The magnets without adhesive pads are securely fastened to the LED light bar using screws. The matching counterparts with adhesive pads are attached to the aquarium cover or another suitable surface, depending on the installation. Alternatively, the counterparts can also be secured using the countersunk center hole if a mechanical screw mounting is preferred or required. Ideal for Maintenance and CleaningThe magnetic mounting system allows the LED light bars to be removed in just a few seconds whenever needed and reattached just as easily. This provides more space for cleaning and maintenance inside the aquarium and also makes it easy to reposition the lighting later – without drilling new holes or applying new adhesive. Thanks to its particularly slim design, the mounting system adds only 10 mm in height, plus the thickness of the LED light bar. This keeps the installation discreet and space-saving. Also ideal for many entry-level aquarium kits that offer only limited mounting options, such as the Eheim aquastar or Juwel Primo. The mounting system has been specifically designed for aquarium use and is fully encapsulated in plastic. The material is food-safe, permanently water-resistant, and completely safe for fish, plants, and invertebrates. Compatible with: eco+ LED light bars PRO² LED light bars Installation Notes The magnets are equipped with a high-strength 3M™ industrial adhesive pad. Since the material and surface characteristics of individual aquarium covers may vary, we cannot guarantee adhesion on customer-provided surfaces. For optimum adhesion, the mounting surface must be clean, grease-free, and completely dry. Press the adhesive pad firmly into place after application. Maximum bond strength is achieved after approximately 72 hours. For plastics that are difficult to bond, we recommend using our optional 3M™ Adhesion Promoter Set (Item No. S4-220P). The included primer significantly improves the adhesion of the adhesive pad on many plastic surfaces. Not suitable for dirty, textured, silicone-contaminated, or poorly bonded surfaces. Technical Specifications Diameter: 17 mm Total height (2 magnets + adhesive pad): 10 mm Color: Black Holding force per magnetic mount: approx. 1,000 g (depending on the mounting surface) Package Contents 1 set = 2 complete magnetic mounts (2 × magnet with screw, 2 × magnet with adhesive pad) ```
Ready for dispatch in 1-2 buisness days
For mounting up to 6 LED bars on the original aquatlantis / tecatlantis support profile.
Ready for dispatch in 1-2 buisness days
